DVI Audio CAT5 Extender - Extends DVI and digital/analog audio up to 200 feet (60 meters) over two CAT-5 cables.
Our DVI Audio Extender extends your DVI and digital/analog audio up to 200 feet away from your HDTV DVI or HDMI™ source using cost effective CAT-5 cables.
How it works
The DVI Audio Extender sender unit sits next to your video source such as computer, DVD player or any set-top box. The cables supplied with the DVI Audio Extender connect your video source/audio source to the sender. Your display/audio receiver plugs into the back of the DVI Audio Extender receiver. Two CAT-5 cables* connect the sender and the receiver units to each other.
Note: The DVI Audio Extender is HDCP compliant.
DVI, HDCP & HDMI Defined
* NOTE: A shielded CAT-5e or CAT-6 cable for DDC is recommended for optimal video quality. The video CAT-5 cable does not need to be shielded.
Package Includes:
* the DVI Audio Extender Sender
* the DVI Audio Extender Receiver
* One 6 foot DVI cable
* One 6 foot Audio RCA cable
* Two 5V Power Supply
* User's Manual
Features:
* Extends any DVI & Digital or Analog Audio compliant device up to 200 feet from the computer
* Uses CAT-5e cable for DDC and control signals
* Supports Digital 8.1(DTS, Dolby Digital, etc.)
* Audio and video are transmitted digitally over the CAT-5e cable for zero signal loss
* Supports resolutions up to 1080p, 2K, and 1920 x 1200
* Supports DDWG standard for DVI compliant monitors
* HDCP compliant
Specifications:
* Data Transmission Rate: 12.8 Mb/s
* Digital Audio Input/Output: S/PDIF (Digital Coax), Optical TOSlink
* Analog Audio Input/Output: RCA Left and Right
* S/PDIF (Digital Coax): 96 kHz Performance
* Video Amplifier Bandwidth: 165 MHz
* Single Link Range:1080P/1920 x 1200
* Input Video Signal:1.2 volts p-p
* Input DDC Signal: 5 volts p-p (TTL)
* Input/Output DVI Connector: DVI-I (29 pin) female, Supports ONLY Digital Signals
* Link Connector: RJ-45
* Power Supply: 5VDC
* Power Consumption: 15 Watts (max)
* Dimensions: 2.5"D x 5.5"W x 1"H
* Shipping Weight: 5 Lbs.
|
